资源类型

期刊论文 370

年份

2023 26

2022 39

2021 31

2020 35

2019 34

2018 15

2017 31

2016 17

2015 11

2014 14

2013 14

2012 5

2011 13

2010 17

2009 15

2008 9

2007 12

2006 3

2005 2

2004 2

展开 ︾

关键词

狭义相对论 5

三峡升船机 4

三峡工程 4

升船机 3

三点弯曲梁 2

塔柱 2

增材制造 2

施工技术 2

横梁 2

阻燃 2

5G 1

ABS 1

ANSYS 1

APP 1

BDP 1

DARPA 1

H2S应力腐蚀 1

ICF 1

展开 ︾

检索范围：

排序： 展示方式：

Seismic behavior experimental study of frame joints with special-shaped column and dispersed steel barbeam

Shuchun LI, Bo DIAO, Youpo SU,

《结构与土木工程前沿（英文）》 2009年 第3卷 第4期   页码 378-383 doi: 10.1007/s11709-009-0064-8

摘要： To overcome the problem that steel bars are put too close at a flame joint with special-shaped beam and column, mechanical performance of three groups of six RC flame joints with special-shaped (L, T and+) column and dispersed-steel bars-beam on the top floor under cyclic loads were studied. Experimental comparison was conducted between special-shaped (L, T and+) column and normal beams. The cracking load, yielding load, ultimate bearing capacity, failure patterns, and hysteretic properties at joint core area were investigated. The seismic behaviors of the joints with different proportions of dispersed-steel-bar beams were analyzed. The results of experimental analysis indicate that the mechanical and seismic behaviors of frame joints with T-shaped and+-shaped column are nearly not changed when suitable proportion steel bars are dispersed to flange plane. Stiffness degeneration of flame joint with L-shaped column is rather serious due to concrete damage stiffness. Theoretical result indicates that distributing area of the dispersed steel-bar beams in the flange plate should be strictly controlled to avoid anchor destroy.

关键词： beam with dispersed steel bar     flame joints with special-shaped beam and column     seismic behavior     scale of dispersed steel bars    

HTML PDF 收藏

Experimental and numerical analysis of beam to column joints in steel structures

Gholamreza ABDOLLAHZADEH, Seyed Mostafa SHABANIAN

《结构与土木工程前沿（英文）》 2018年 第12卷 第4期   页码 642-661 doi: 10.1007/s11709-017-0457-z

摘要： The behaviors such as extreme non-elastic response, constant changes in roughness and resistance, as well as formability under extreme loads such as earthquakes are the primary challenges in the modeling of beam-to-column connections. In this research, two modeling methods including mechanical and neural network methods have been presented in order to model the complex hysteresis behavior of beam-to-column connections with flange plate. First, the component-based mechanical model will be introduced in which every source of transformation has been shown only with geometrical and material properties. This is followed by the investigation of a neural network method for direct extraction of information out of experimental data. For the validation of behavioral curves as well as training of the neural network, the experiments were carried out on samples with real dimensions of beam-to-column connections with flange plate in the laboratory. At the end, the combinational modeling framework is presented. The comparisons reveal that the combinational modeling is able to display the complex narrowed hysteresis behavior of the beam-to-column connections with flange plate. This model has also been successfully employed for the prediction of the behavior of a newly designed connection.

关键词： beam to column connections     experiments     component method     neural network model     combinational modeling    

HTML PDF 收藏

Investigation of the interior RC beam-column joints under monotonic antisymmetrical load

Fei GAO, Zhiqiang TANG, Biao HU, Junbo CHEN, Hongping ZHU, Jian MA

《结构与土木工程前沿（英文）》 2019年 第13卷 第6期   页码 1474-1494 doi: 10.1007/s11709-019-0572-0

摘要： The paper presents numerical findings of reinforced concrete interior beam-column joints under monotonic antisymmetrical load. The finite element models considered compression and tension damage were calibrated by test results in terms of the load-displacement, failure modes, and strains of longitudinal steel. The emphasis was put on studying the effects of hoop reinforcement ratio in joint core and the axial compression ratio on the responses of the joints. The results show that, in addition to the truss and strut-and-tie mechanisms, the confinement mechanism also existed in the joint core. A certain amount of stirrup is not only able to enhance the confinement in joint core, undertake a part of shear force and thus to increase the shear capacity, prevent the outward buckling of steel bars in column, improve the stress distribution in joint core, delay cracking and restrain the propagation of cracks, but also to increase the yield load, decrease the yield displacement of beam and improve the joint ductility. However, excessive horizontal stirrups contribute little to the joint performance. In a certain range, larger axial compression ratio is beneficial for the joint mechanical behavior, while it is negative when axial compression ratio is too large.

关键词： RC beam-column joint     reinforcement ratio in joint core     axial compression ratio     finite element     test    

HTML PDF 收藏

Modeling of semi-rigid beam-to-column steel joints under extreme loading

C FANG, B A IZZUDDIN, A Y ELGHAZOULI, D A NETHERCOT

《结构与土木工程前沿（英文）》 2013年 第7卷 第3期   页码 245-263 doi: 10.1007/s11709-013-0215-9

摘要： Joints play an important role in providing ductility for steel-composite structures subject to extreme loading conditions, such as blast, fire and impact. Due to sound energy dissipation capability and fabrication efficiency, semi-rigid joints have increasingly received attention during the last decade. This paper presents a component approach for modeling semi-rigid beam-to-column joints based on Eurocode3, where the post-elastic response, including component strain hardening and ultimate rotational capacity, is also considered. Failure criteria are defined based on the ultimate deformation capacity of components and bolt-rows. The model enables a direct integration of joint response into global frame models with the consideration of axial deformability, such that the interaction between bending moment and axial force within the joints can be realistically captured. In addition, elevated temperature can be considered in the joint model via the degradation of the component response. Through comparisons with available test data, the joint model is shown to have good accuracy, and the failure criteria are found to be reliable yet conservative. The strain hardening response of components is shown to have significant influence on the ultimate bending capacity of the joints, while neglecting it usually leads to a conservative prediction.

关键词： semi-rigid joint     component method     ductility     elevated temperature    

HTML PDF 收藏

Cyclic behavior of stiffened joints between concrete-filled steel tubular column and steel beam with

Chunyan QUAN,Wei WANG,Jian ZHOU,Rong WANG

《结构与土木工程前沿（英文）》 2016年 第10卷 第3期   页码 333-344 doi: 10.1007/s11709-016-0357-7

摘要： This paper presented an investigation on a stiffened joint in practical engineering which was between concrete-filled steel tubular column and steel beam with narrow outer diaphragm and partial joint penetration welds. Through the low-frequency cyclic loading test, the cyclic behavior and failure mode of the specimen were investigated. The results of the test indicated the failure mode and bearing capacity of the specimen which were influenced by the axial compression ratio of the concrete-filled tubular column. On the contrary, the inner diaphragm and inner stiffeners had limited impacts on the hysteretic behavior of the joint. There was no hysteresis damage fracture on the narrow outer diaphragm connected to the concrete-filled steel tubular column with partial joint penetration welds. Due to the excellent ductility and energy dissipating capacity, the proposed joint could be applied to the seismic design of high-rise buildings in highly intensive seismic region, but axial compression ratio should be controlled to avoid unfavorable failure modes.

关键词： narrow outer diaphragm     concrete-filled tubular column     joint     inner and outer stiffening     cyclic behavior    

HTML PDF 收藏

T形截面柱框架节点试验及非线性有限元分析

陈昌宏,黄莺,马乐为,吴敏哲,单建

《中国工程科学》 2007年 第9卷 第11期   页码 92-95

摘要：

对6个T形截面柱框架节点试件进行了试验，分别以梁截面高度、柱轴压比和节点区水平箍筋体积配箍率为变量参数，研究了节点区裂缝的形成与开展、节点的破坏机理；提出在低周期反复荷载作用下T形柱框架节点的裂缝呈反“K” 型，而不是类似于常规矩形节点的“X”型交叉裂缝，其受力机理偏于较陡的斜压杆受力模型；运用大型通用有限元软件ANSYS的二次开发语言APDL对T形截面柱节点进行非线性有限元分析，结果表明离散型非线性有限元模型计算结果与试验结果有很好的吻合。改变有限元程序参数使节点发生核心区剪压破坏，对节点裂缝的形成与开

关键词： T形节点     裂缝     破坏机理     ANSYS     非线性有限元    

HTML PDF 收藏

Special Column on

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 323-324 doi: 10.1007/s11709-014-0288-0

HTML PDF 收藏

Special column: solar energy conversion

Yun Hang HU, Fangming JIN

《能源前沿（英文）》 2019年 第13卷 第2期   页码 205-206 doi: 10.1007/s11708-019-0636-9

HTML PDF 收藏

Experimental analysis on strength and failure modes of wood beam-column connections

Zhenhua HUANG,Sheldon Q SHI,Liping CAI

《结构与土木工程前沿（英文）》 2014年 第8卷 第3期   页码 260-269 doi: 10.1007/s11709-014-0261-y

摘要： This research experimentally examined the strength, failure modes, and behaviors of dowel-bearing and fiber-bearing wood beam-column connections and explored the effects of cyclic loading on the strength, failure modes, and behaviors of those connections. Base on limited numbers of exploratory laboratory tests (6 preliminary tests in total), the authors observed that the typical bolted connection (dowel-bearing type wood beam-column connection with fiber-bearing surfaces) showed good behavior (large peak moment) under the monotonic loads, and the tenon joint connection (fiber-bearing wood beam-column connection) showed good behavior under cyclic loads. The cyclic property of loading reduced the strength of the dowel-bearing type wood beam-column connections, but increased the strength of fiber-bearing type wood beam-column connections. More importantly, the authors identified a possible location of safety concern in current national design specifications (NDS) standards for the typical bolted connection (dowel-bearing connection with fiber bearing surface) under cyclic loading because the tested value was smaller than the NDS calculated value. But, because of the small amount of tests conducted, no final conclusion can be drawn based on those preliminary observations yet. A large number of repetitive laboratory tests should be conducted.

关键词： wood     connection     dowel-bearing     fiber-bearing    

HTML PDF 收藏

Special Column on Multiscale Stochastic Finite Element Method

《结构与土木工程前沿（英文）》 2015年 第9卷 第2期   页码 105-106 doi: 10.1007/s11709-015-0297-7

HTML PDF 收藏

Discontinuous mechanical behaviors of existing shield tunnel with stiffness reduction at longitudinal joints

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 37-52 doi: 10.1007/s11709-022-0920-3

摘要： An analytical model is proposed to estimate the discontinuous mechanical behavior of an existing shield tunnel above a new tunnel. The existing shield tunnel is regarded as a Timoshenko beam with longitudinal joints. The opening and relative dislocation of the longitudinal joints can be calculated using Dirac delta functions. Compared with other approaches, our method yields results that are consistent with centrifugation test data. The effects of the stiffness reduction at the longitudinal joints (α and β), the shearing stiffness of the Timoshenko beam GA, and different additional pressure profiles on the responses of the shield tunnel are investigated. The results indicate that our proposed method is suitable for simulating the discontinuous mechanical behaviors of existing shield tunnels with longitudinal joints. The deformation and internal forces decrease as α, β, and GA increase. The bending moment and shear force are discontinuous despite slight discontinuities in the deflection, opening, and dislocation. The deflection curve is consistent with the additional pressure profile. Extensive opening, dislocation, and internal forces are induced at the location of mutation pressures. In addition, the joints allow rigid structures to behave flexibly in general, as well as allow flexible structures to exhibit locally rigid characteristics. Owing to the discontinuous characteristics, the internal forces and their abrupt changes at vulnerable sections must be monitored to ensure the structural safety of existing shield tunnels.

关键词： tunnel–soil interaction     discontinuous analysis     longitudinal joints     existing shield tunnel     Timoshenko beam     Dirac delta function    

HTML PDF 收藏

Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed

《结构与土木工程前沿（英文）》   页码 1145-1162 doi: 10.1007/s11709-023-0945-2

摘要： To realize seismic-resilient reinforced concrete (RC) moment-resisting frame structures, a novel self-centering RC column with a rubber layer placed at the bottom (SRRC column) is proposed herein. For the column, the longitudinal reinforcement dissipates seismic energy, the rubber layer allows the rocking of the column, and the unbonded prestressed tendon enables self-centering capacity. A refined finite element model of the SRRC column is developed, the effectiveness of which is validated based on experimental results. Results show that the SRRC column exhibits stable energy dissipation capacity and no strength degradation; additionally, it can significantly reduce permanent residual deformation and mitigate damage to concrete. Extensive parametric studies pertaining to SRRC columns have been conducted to investigate the critical factors affecting their seismic performance.

关键词： seismic resilience     self-centering     rubber layer     flag-shaped hysteresis loop     parametric study    

HTML PDF 收藏

Effect of eccentricity in reinforced concrete beam-column-slab connection under cyclic loading

Rooh ULLAH, Amjad NASEER, Muhammad FAHIM, Mohammad ASHRAF, Eid BADSHAH

《结构与土木工程前沿（英文）》 2021年 第15卷 第2期   页码 390-398 doi: 10.1007/s11709-021-0690-3

摘要： Beam–column connections are one of the most critical elements of reinforced concrete structures, especially in seismically active regions, and have been extensively evaluated experimentally and numerically. However, very limited experimental studies about eccentric reinforced concrete connections including the effect of connected slabs are available. This study presents the experimental results of two half-scale eccentric beam-column-slab connections subjected to quasi-static cyclic loading. The horizontal eccentricity ( ) is maintained at 12.5% and 25% of column width ( ) for specimens 1 and 2, respectively. The damage pattern, performance levels, displacement ductility ( ), energy dissipation, and connection strength and stiffness are compared for both specimens, and the effect of eccentricity is evaluated. It is concluded that the eccentricity has no significant effect on the lateral load carrying capacity; however, the overall strength degradation increases with the increase in eccentricity. Similarly, the elastic stiffness of specimen 2 decreased by 14% as the eccentricity increased from 12.5% to 25%; however, the eccentricity had no significant effect on the overall stiffness degradation. decreased by 43%, and the energy dissipation capacity decreased by 40% in specimen 2 with higher eccentricity. The story drifts corresponding to the performance levels of the life safety (LS) and collapse prevention (CP) were found to be 28% lesser in specimen 2 than in specimen 1.

关键词： corner connection     eccentricity     strength degradation     stiffness degradation     energy dissipation     performance levels    

HTML PDF 收藏

Slender reinforced concrete shear walls with high-strength concrete boundary elements

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 138-151 doi: 10.1007/s11709-022-0897-y

摘要： Reinforced concrete structural walls are commonly used for resisting lateral forces in buildings. Owing to the advancements in the field of concrete materials over the past few decades, concrete mixes of high compressive strength, commonly referred to as high-strength concrete (HSC), have been developed. In this study, the effects of strategic placement of HSC on the performance of slender walls were examined. The finite-element model of a conventional normal-strength concrete (NSC) prototype wall was validated using test data available in extant studies. HSC was incorporated in the boundary elements of the wall to compare its performance with that of the conventional wall at different axial loads. Potential reductions in the reinforcement area and size of the boundary elements were investigated. The HSC wall exhibited improved strength and stiffness, and thereby, allowed reduction in the longitudinal reinforcement area and size of the boundary elements for the same strength of the conventional wall. Cold joints resulting from dissimilar concrete pours in the web and boundary elements of the HSC wall were modeled and their impact on behavior of the wall was examined.

关键词： slender walls     high-strength concrete     rectangular and barbell-shaped walls     cold joints    

HTML PDF 收藏

三峡升船机塔柱横梁混凝土施工技术

余英

《中国工程科学》 2013年 第15卷 第9期   页码 27-32

摘要：

三峡升船机船厢室段塔柱承重结构的横梁混凝土浇筑施工难度大、复杂性高、无成熟技术可供参考。本文结合三峡升船机塔柱横梁混凝土浇筑的结构特点以及施工特性，总结了三峡升船机续建工程顶部横梁混凝土的施工技术，即采用分层、分块浇筑的办法，通过科学计算后进行合理的施工机械布置和浇筑施工管理，以保证塔柱横梁混凝土的施工质量。通过对贝雷架支撑系统的监测结果分析可知，贝雷架支撑系统的应力变形、挠度变形以及排架变形均满足施工承载要求，筒体位移亦满足技术要求，贝雷架支撑系统稳定、安全。三峡升船机塔柱横梁混凝土施工实践证明了本技术方案的有效性与可靠性，亦可为类似工程的施工组织设计与现场实施工作提供一定的参考。

关键词： 升船机     横梁     混凝土     施工缝     浇筑分层     三峡工程    

HTML PDF 收藏

标题 作者 时间 类型 操作

Seismic behavior experimental study of frame joints with special-shaped column and dispersed steel barbeam

Shuchun LI, Bo DIAO, Youpo SU,

期刊论文

Experimental and numerical analysis of beam to column joints in steel structures

Gholamreza ABDOLLAHZADEH, Seyed Mostafa SHABANIAN

期刊论文

Investigation of the interior RC beam-column joints under monotonic antisymmetrical load

Fei GAO, Zhiqiang TANG, Biao HU, Junbo CHEN, Hongping ZHU, Jian MA

期刊论文

Modeling of semi-rigid beam-to-column steel joints under extreme loading

C FANG, B A IZZUDDIN, A Y ELGHAZOULI, D A NETHERCOT

期刊论文

Cyclic behavior of stiffened joints between concrete-filled steel tubular column and steel beam with

Chunyan QUAN,Wei WANG,Jian ZHOU,Rong WANG

期刊论文

T形截面柱框架节点试验及非线性有限元分析

陈昌宏,黄莺,马乐为,吴敏哲,单建

期刊论文

Special Column on

期刊论文

Special column: solar energy conversion

Yun Hang HU, Fangming JIN

期刊论文

Experimental analysis on strength and failure modes of wood beam-column connections

Zhenhua HUANG,Sheldon Q SHI,Liping CAI

期刊论文

Special Column on Multiscale Stochastic Finite Element Method

期刊论文

Discontinuous mechanical behaviors of existing shield tunnel with stiffness reduction at longitudinal joints

期刊论文

Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed

期刊论文

Effect of eccentricity in reinforced concrete beam-column-slab connection under cyclic loading

Rooh ULLAH, Amjad NASEER, Muhammad FAHIM, Mohammad ASHRAF, Eid BADSHAH

期刊论文

Slender reinforced concrete shear walls with high-strength concrete boundary elements

期刊论文

三峡升船机塔柱横梁混凝土施工技术

余英

期刊论文